EEXPRESS-DIAG(8)                                 EEXPRESS-DIAG(8)



NAME
       eexpress-diag  - Diagnostic program for Intel EtherExpress
       16

SYNOPSIS
       eexpress-diag [options]

DESCRIPTION
       eexpress-diag is a programm which you can use to  diagnose
       problems with your Intel EtherExpress 16 cards.

OPTIONS
       These  programs  follow the usual GNU command line syntax,
       with long options starting with two dashes (`-').  A  sum-
       mary of options is included below.

       -h, --help
              Show summary of options.

       -V, --version
              Show version of program.

       -v, --verbose
              Verbose mode.

       -a, --all
              Print all registers.

       -p, --base-address <port>
              Specify  port  to  use.  Valid  values  are: 0x240,
              0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360

       -Q, -i, --irq <irq>
              Specify   new   interrupt.   Valid   values    are:
              3-5,9-12,15.

       -w, --write-EEPROM <values>
              Write to the EEPROMS with the specified values.

SEE ALSO
       mii-diag(8)

AUTHOR
       This   manual   page   was   written  by  Alain  Schroeder
       <alain@debian.org>, for the Debian GNU/Linux  system  (but
       may be used by others).



                          March 8, 2001          EEXPRESS-DIAG(8)